Please no hesitate contact me if you have any need or question 0086-134 2515 7873
EV Charger Indoor Charging Station, Wall Mounted type
1. Overview:
SETQCY series DC charging station is mainly used for electric vehicle fast charging. Products can be installed outdoors, with waterproof, dustproof design IP54. This DC fast charging station has charging interface, man-machine interface, communications, billing and other parts, modular design, easy installation, operation and maintenance and simple, and the charger with the use of electric vehicles outdoor DC fast charge ideal choice.
2. Product Features:
1.Intelligent module, CPU module built intelligent management, with manual / automatic dual control ; 2.Distributed control system, a single module failure does not affect system operation ; 3.Module efficiency up to 95%; 4.Charging module has a sleep function, based on the number of modules automatically select the size of the load current to start, so that the module and efficient operation ; 5.Charging module uses a unique full isolation dust structure, built-in cooling fan with intelligent speed control, and can automatically adjust the fan speed according to the load operation, to extend the life of the fan; 6.Acceptable remote trip command to achieve the emergency stop function. 7.Charging module comes with APFC function, power factor of 0.99, the total harmonic current distortion THD <5%charging
3. How to choose EV charging station for your cars:
SETQCY DC quick charger consists of charging modules, monitor, smartmeter, HMI, communication module, charging connector, management and cabinet.
DC Quick charging station offers Electric Vehicle owners an opportunity to charge their car safely and quickly. A typical electric car with 24kWh battery pack may be charged as quickly as 20 minutes to get up to 80% of its capacity.
For example,
We know Nissan Leaf battery capacity is 24KWH, if you use our 20KW EV charger, 1,it needs 24KWH/20KW=1.2hour=72minutes from 0% to 100%.
2,if you use our 40KW EV charger, it needs 24KWH/40KW=0.6hour=36minutes from 0% to 100%.
different output power of EV charger, different charging speed.
The Charger combines industry standardization with advanced charging technology to support next-generation electric vehicles. Seamless integration with several payment & billing platform solutions enable easy and secure payments via station payment terminals and RFID card.
4. Structure Diagram:
5.System Technical Data:
Name content remark
Machine Index Full load efficiency ≥95%
OHZ~20MHz clutter VP-P 0.20%
Current unaverage in parallel ≤5%
insulation strength (V) 2000VAC/50Hz 10mA,1min No flash off
Insulation resistance(MΩ) 10 Ground
Power Surge no Soft Start
Module load indication LED Display output DC current LED10 setion LED10 ,+3LED
Output current display accuracy ≤±10%
Communication Interface CAN2.0B
Environmental Indicators Ambient temperature -25~55 ℃ storage:-40~70 Celsius
Humidity ≤90%(40±2 Celsius) storage:95%(40±2 )
Altitude 1500m derating use when it is above 1500m
Electromagnetic Compatibility EN55022 CLASS A (YD/T983-1998)A grade
Input indicators Line Voltage(VAC) 380
Voltage Type AC three-phase four-wire
Frequency(HZ) 45~55
Power Factor 0.99
Current THD value ≤5%
Input undervoltage protection value(V) 323±5V
Input undervoltage protection value(V) 323±5V
Output Indicators Nominal output voltage(V) 700V
Output Current(A) 0~100A
Regulation accuracy ≤0.5%
steady current accuracy ≤1%
Ripple Peak factor ≤0.5%
The output voltage range(V) 600~750V
Short circuit current(A) ≤30A Single Module
Output Power 0kW~50kW
Mechanical indicators packaging Wooden packing
Dimensions(W×H×D) 544×88×430(Rectifier module) 2260×600×600(System Cabinets) mm
Module weight 13Kg
System Weight <160Kg
protection grade IP21
other Parallel Extensions ≤6 The number of modulesoperation in parallel
Cooling Air Cooled Load, temperature joint control