|
 Description
|
IntroductionNT6800WNR has 6 relays, 8 isolated input. Communicate by rj45 network or Wi-Fi, supports Modbus-TCP.( NT6800WNDSR: with one DS18B20 temperature sensor in addition )It can be controlled by PLC / computer / android, suitable for industrial automation, data acquisition systems, environmental monitoring and local control of an electrical and non-electrical parameter, building automation etc.Key components: HLK-RM04 serial network module, STM8S105K4T6C, HR911105A, supports secondary development.How to use network relay made by nitwo tech? It’s easily by 3 steps:Step 1: Power on the NT6800WNR module with 12-24VDC.Step 2: Search the SSID of hi link network module rm04 with Wi-Fi dhcp mode.Step 3: Run android app or .exe file of computer and connect with IP:192.168.16.254 port: 8080NT6800WNR app apk and .exe software download link：https://www.nitwo.com/en/download/download-nt6800wnr-apk-exe.htmlFeatures> 10/100 Mb Ethernet connectivity;
> Auto-MDIX;
> 8 digital isolated inputs,8 input + with one COM-;> 6 relay outputs Type: with NO and NC contacts; Contact current rating: 10 A @ 30 VDC/250 VAC (resistive load) Initial insulation resistance: 100 mega-ohms (min.) @ 500 VDC Minimum pulse output of relay: 2 Hz at rated load> SMA Wi-Fi male pin socket adapter for antenna or adaptor for extension cable.> 35mm DIN Rail fixed> Working voltage: 12 to 24V wide voltage input> Working current: 0.3~0.5 A ( all relays ON)> Plug-able high current terminals, convenient for wiring and changing positionOperating mode configuration switch description (able to custom as client's need)S1 OFF: All relay state is off when power on (all open mode).S1 ON: All relay states before power off can be logged in internal flash memory, for next time power on they will active same as the last time (memory mode).S2 OFF: Relay is able to active sync with digital DI input, example input 1 availed the relay 1 availed also, only be controlled locally by DI (sync mode).S2 ON: Relays can be activated either remotely PLC/Computer (MODBUS Master) or locally by digital DI input (pulse mode).S3 OFF: Relay will active with digital DI input changing (Sync or Pulse mode, optional by dial dip-switch S2) (Linked mode).S3 ON: Relay is able to configure to no relation with digital DI input, example input 1 availed but the relay 1 doesn’t availed (unlinked mode).S4 OFF: Accessed by upper Master PLC/Computer (check mode).S4 ON: Initiative to report the DO DI states to upper Master PLC/Computer (report mode).
SENSOR: Connect to temperature sensor or temperature humidity sensor (coming soon).Power-LED: Power is ONWi-Fi-LED: Blinks when Wi-Fi working modeLan-Link-LED: Blinks when LAN working mode  Less ...
|
|
|
Results : https
More ...
