This Automatic Needle Assembly Machine has been designed & built under unique technologies developed by our long experienced in-house technicians. As a long experienced manufacturer of Needles, we put all our experience & know-how to the machine and it will surely give full satisfaction to users of the machine.
Needles are produced in many different sizes and must be handled with absolutely no damage to the sharp point. Needles and plastic parts (Hub & Cap) are fed & oriented, assembled, glued and siliconized, inspected with various systems on a typical assembly machine. Failed assemblies are pneumatically ejected into a reject bin, while completed Needles are accumulated and then output into trays as a final station of the procedure.
Unique systems for transfer & assembling of the machine allow very high-speed & accurate operation as well as no-damage to components including sharp point.
Out-put of the machine is 62,000~70,000 Needles per every hour and can be increased by up-skilling of operators.
Features
- Available with various types of Epoxy Bonds using(or U.V)
- Very High Assembly Resolution
- Higher Assembly Quality
- Automatic Operation
- Accurate & High Speed
- Superior Durability
- Minimize production coast by excellent speed & durability of machine
- Hub Corona Treatment
- Special Siliconizing System & methods to avoid Clogginess during silicon coating
- Cylinder driven JIG transfer system (old model was Belt driven-transfer system) enable to avoid dust & fragment from Belt, reduce Noise & Vibration.
- Hub & Cap supply by Vacuum system enable for Secure & stable operation.
- Siliconizing by Vertical Dipping ; Accurate & Stable operation.
Technical Specification
Dimension aprx. 7,400 x 3,500 x 1,700mm (L x W x H)
Weight aprx. 3,200Kg
Electricity AC 3Px220/380V, 16Kw/H
Air Consumption Aprx. 600L/min, 6Kg/Cm
2
Production Capacity Max.68,000 ~ 70,000Pcs/Hour, (Min.55,000pcs guaranteed)
Available Production Sizes 18G to 29G
Main Frame Material SS41 Cr Hard Coating & AL6061
Bonding Methods Wheel Type by Servo Controller
Using Bond Epoxy Adhesive or U.V.
Epoxy Drying Heating Tunnel, 100~110°C
Silicon Coating Dipping Type,
Hub Supply Shut Type
Hub Corona Treatment Installed
Cannula Supply Lift Type
Auto Production Counter Installed
Inspection Items Damaged point, Bend, Blockage, Reverse, No-Cap etc.
Inferior Needles Auto-Ejecting
Transfer Jigs 400 pcs
Number of Workers 2 person
Optional Item
1. Cap Auto-Feeder Enable to reduce workers
2. Vision Inspector More Precise & Accurate Needle Point Inspection
3. Silicon Cooler Prevent Silicon Oil wastage
JW MEDICS CO., LTD.
A-1010 Bucheon Daewoo Techno Park, 261, Doyak-Ro, Wonmi-Gu,
Bucheon-City, Gyonggi-Do, 420-896, Korea
Web site:
http://www.jwmedics.co.kr,
Tel: 82-32-670-7691(Rep), Fax: 82-32-670-7699
Less ...
Results : https
More ...
