Features

AC input active surge current limiting Built-in active PFC function, ...    More ...

Features

• AC input active surge current limiting
• Built-in active PFC function, PF>0.95
• Protections:Short circuit/Over load/Over voltage/Over temperature
• Built-in constant current limiting circuit
• Built-in remote ON-OFF control
• Built-in remote sense function

Standards

Specification

SETUP, RISE, HOLD TIME 1.5s, 50ms, 15ms/230VAC at full load
VOLTAGE RANGE 176 ~264VAC 248 ~ 370VDC
FREQUENCY RANGE 47 ~ 63Hz
POWER FACTOR PF>0.95/230VAC at full load
AC CURRENT 10.5A/230VAC
INRUSH CURRENT (max.) 100A/230VAC
LEAKAGE CURRENT <3.5mA / 240VAC
OVER LOAD 115~140% of rate load Protection type : Constant current limiting, recovers automatically after faul
OVER TEMPERATURE OVER TEMPERATURE TSW1: 95?C (Detect on the heatsink of PFC MOSFET) TSW2: 90?C (Detect the winding of
  Protection type : Shun down o/p voltage, recovers automatically after temperature goes down
REMOTE CONTROL RC+/RC-: 0 ~ 0.8V=power on ; 4 ~ 10V=power off sink current <30mA
WORKING TEMP., HUMIDITY -10~+65?C (Refer to output load derating curve), 20~90% RH non-condensing
STORAGE TEMP., HUMIDITY -20~+85?C , 10~95% RH
TEMP. COEFFICIENT ?0.03%/?C (0~50?C)
VIBRATION 10~500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS UL1950, TUV EN60950 Approved
EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT Compliance to EN61000-3-2,-3, Class A
EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, Light industry level, criteria A
WITHSTAND VOLTAGE WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
MTBF 43.4K hrs min. MIL-HDBK-217F (25?C )

Items

PSP-1500 Series