Official Web Page DESCRIPTION Laser Plotter Cometa is the large laser cutting machine of the Proel range ...    More ...

Official Web Page
 
DESCRIPTION
Laser Plotter Cometa is the large laser cutting machine of the Proel range for laser cutting and laser engraving. This machine, available in the 25, 50 or the 100 Watt version, is ideal for those who need to cut large sizes of material (up to 1600x850 mm) or even to cut material supplied in rolls.
MAIN FEATURES
The machine equipped with a CO2 Laser source of 25, 50, 100 or 200 Watt (air-cooled), a cutting head driven on two axes by powerful brushless motors, the possibility of assembling either a fixed cutting plane or a motorized cutting plane (for automatic loading/discharge of material to be worked/finished). Usable cutting area (1600x850 mm), external fume suction device that may be connected to a filtering unit, RS-232 interface for connection to a Personal Computer, possibility of control at three power levels (usually one for cutting and two for engraving), possibility of selecting two cutting modes: constant speed or variable speed for optimizing times, cleaning of the cutting head using air produced by an internal pump or with air produced by an external source or with gases specific for laser cutting (usually Nitrogen). Laser pointer for positioning the material to be used.
MAIN OPERATING FUNTIONS
Memorization of 10 different work profiles
Management of 6 languages for interfacing with the user
Management of ten levels of laser power
Setting of the cutting/engraving speed
Setting of the cutting head handling mode
Possibility of manually positioning the cutting head by means of the control panel
Possibility of manually handling the cutting plane advancement by means of the control panel
"Spot Laser" function for locating the laser ray on the material to be used
"Pause Cut" function
Possibility of continuing an unfinished job even after an electrical power failure
Self-diagnostic feature
Cutting assisted by a videocamera
Cutting of compositions (automatic repetition of the same cutting shape)
Management of different fume suction modes
Possibility of cutting the material in a straight line by means of the control panel
Work hours count
Work cycles count for each job
Display of the position of the cutting head (in X,Y coordinates)
I would like to receive more information

USABLE SOFTWARE for LASER CUTTING
FOCUSCUT III and VideoCut
TECHNICAL SPECIFICATIONS
Electrical input 1phase 220/240 Vac ±10% - 50/60Hz ±2%
Absorbed power max. 1500 W
Dimensions (WxDxH) 2270x1680x1200 mm
Weight  max. 450 Kg
Noise emission < 70 dB (without fumes suction unit)
Drive motors type brushless
Working area  (WxD) 1600x850 mm (63"x33")
Cutting plane size (WxD) 1665x940 mm (66"x37")
Cutting plane type metal grid / fixed
Fumes extraction top and bottom suction system
Fumes suction external free standing unit
Laser source type CO2 - 10.6 µm - sealed type - RF  Air liquid cooled
Laser power 25W / 50W / 100W / 200W
Laser beam delivery mirrors and XY movable cutting head
Laser spot diameter 100 µm
Cutting speed until to 1.8 m/s
Translation speed 2 m/s
Acceleration 1.5 g
Resolution 8 µm
Optics cleaning internal or external air /                           external gas
User interface keyboard with display

Languages EN / IT / FR / GE/ SP / PO
Software Focuscut III - Videocut
Laser product Class class 3R (EN-60825-1:2003-02)
class IIIa (USA-CDRH 21 CFR)
Safeties protective enclosures + laser beam stop access panel with safety interlocks
Material positioning red light laser pointer on the cutting head

Less ...