Environment Friendly Machining Tokyo Protocol oriented product ISO 14001 adaped No machining ...    More ...

Environment Friendly Machining

• Tokyo Protocol oriented product
• ISO 14001 adaped
• No machining residuals
• Productivity increase by the reduction of washing and spaying times
• Tool Life longer, and Defect rate decreased Industrial accidenst prevented in the clean working area
• No toxicants of Clorine, Sulfur and Phosphor No Dioxine in the air

M.Q.L Operation

• Efficient and good effect External Lubrication
  because of below 1 micro Naomist Oil not condensed from atomizing spray
• Powerful Internal Lubrication
  because of 300 meter dischare from dia. 12 mm tube
• Machining surface condition improved
• Tool Life 1.5 ~ 3 times longer
• Cutting Speed 1.5 ~ 3 times higer
• Machining error reduced by visible operation
• Machines and surrounding environment more clean
• 100% Vegetable Ester Oil usage with no toxicant
• Less oil consumption 2 ~ 20 cc/HR ( 2~3 liter/month in 8 hours/day)

Environment Friendly Naomist Oil

• Environment friendly Naomist Oil with no harm to human body as 100% Vegetable Ester Oil
• Less consumed economical Naomist Oil
  Because of invisible oilmist consumed in the least particle
• No Environmental pollution
  Because of no chemical toxicants in the Naomist Oil

Micro Oilmist Atomized Spray & Machining

• Below 1 micron atomized Oilmist affecting wide spreading and better machining condtion
• No Oilmist smoke, and Penetration into tool ends
  Because of Naomist Oil not condensed from discharge spray
• Much better Cooling effect and Lubrication
  Because of Naomist Oil not condensed from discharge spray on high speed revolution
• Machining productivity improved
  Because of Naomist Oil with adhesive power to Workpiece and plate
• 300 meter discharge power from dia. 12mm tube

Less ...