Quickly configure, start and stop tests on the 1550C remotely, a safe distance away from any operating, ...    More ...

• Quickly configure, start and stop tests on the 1550C remotely, a safe distance away from any operating, energized equipment, using Fluke Connect^® and a smart phone
• Real time trending gives you easy-to-see visual cues, rather than hard to read, rapidly changing values
• Report creation using Fluke Connect desktop saves time and makes test results easier to understand
• Fluke Connect saves test results to the cloud for analysis and preventive maintenance
  
  
  Table 1. Required Equipment 
  Equipment Minimum Required Characteristics Recommended 
  Model 
  HV Probe 6 kV, ±1 % (1000:1 Divider) 
  11 kV, ±2 % for the 1555 
  Fluke 80K-6 
  80K-15 
  Digital Multimeter 500 mVdc to 1 V: ±0.02 % Fluke 8508 
  Load with Guard Terminal[1] 
  Resistances 
  200 kΩ, ±1.25 %, 500 V 
  500 kΩ, ±1.25 %, 500 V 
  1 MΩ, ±1.25 %, 1 kV 
  2.5 MΩ, ±1.25 %, 2.5 kV 
  5 MΩ, ±1.25 %, 5 kV 
  10 MΩ, ±1.25 %, 10 kV 
  1 GΩ, ±1.25 %, 10 kV 
  100 GΩ, ±1.25 %, 10 kV 
  200 GΩ, ±1.25 %, 10 kV 
  500 GΩ, ±5 %, 10 kV 
  1 TΩ, ±5 %, 10 kV  
  2 TΩ, ±5 %, 10 kV 
  Combinations of: 
  Welwyn F Series, 
  Welwyn MFP2 Series 
  And Vishay HTS-523 
  Capacitors with Bleeder 
  Resistors[2] 
  0.1 μF, ±5 %, 500 V, Polypropylene 
  1 μF, ±5 %, 2.5 kV, Polypropylene 
  
  
  Calibrator 
  DC current: 2 mA 
  Accuracy: ±1.25 % 
  DC Voltage: 0 - 550 V 
  Accuracy: ±0.005 % 
  AC Voltage: 0 - 240 V, 60 Hz 
  Accuracy: ±1.25 % 
  Fluke 5080,  
  Fluke 5520A 
  IR Cable Assembly Fluke P/N 2166275 
  Calibration Software[3] Snorre 
  Ammeter Fluke 8508 
  Personal computer IBM compatible, with Microsoft Windows XP 
  SP2 or later + .NetFramework 2.0 or later 
  

Less ...