Picture instruction :1-single component conductive silicone;2-Two component conductive silicone;3-potting seal silicone compond,4-Thermal conductive silicone grease
Picture1:
Model: YL-1700S series (single component)
Product Description: The YL-1700S series is a high-performance paste like interval filled thermal conductive material that forms according to the shape of the structure, targeting uneven ceramics and heat dissipation
The surface or irregular cavity of the device has the best structural applicability and surface adhesion characteristics, with sufficient gap filling. The product has good insulation and temperature stability, and is safe and reliable to use. It can flow under pressure like thermal conductive silicone grease, and has high reliability under thermal cycling without curing. The performance can completely replace thermal conductive silicone grease and thermal conductive gaskets to meet different spacing shapes and thicknesses, and the stress during displacement is extremely small, which can meet the requirements of interface material thickness and shape in individual applications.
Advantages and features: single component use, non curing, high reliability, good application effect of irregular structure spacing, good electrical insulation, mechanical performance
Good weather resistance.
Application scope: mobile phones, communication devices, network terminals, storage devices, security devices, power devices, LED lighting fixtures, etc.
Test Item
Unit
YL-1700S-15
YL-1700S-35
YL-1700S-60
Test Method
Gravity
g/cm3
2.6
2.9
3
ASTM D792
Thermal Conductivity
W/m.k
1.5
3.5
6
ASTM D5470
Extrusion Volume
g/min
65
60
20
YL METHOD
Dielectric Breakdown Vottage
KV/mm
>6
>6
>6
ASTM D149
Volume Resistivity
Ω.cm
9.6x10~13
9.6x10~13
9.6x10~13
ASTM D257
Thermal Expansion
ppm/k
152
152
152
ASTM E831
Flame Retardant Grade
--
VO
VO
VO
UL94
Typical Minmimum Thickness
mm
0.1
0.1
0.2
YL METHOD
Temperature Range
℃
-40~200
-40~200
-40~200
YL METHOD
Picture2:
Model: YL-1000SL-XXAB series
(Two component conductive Silicone)
Specifications: 50ml, 400ml, 5L, 20L
Composition: organic silicon gel+thermal conductive filler
Product Description: The YL-1000SL-XXAB series is a paste like gap filling thermal conductive material. It can react and solidify at room temperature or high temperature, and the cured product is a soft and thermally conductive elastomer that forms according to the shape of the structure; For uneven ceramic, radiator surfaces, or irregular cavities, it has the best surface adhesion of structural components. Before curing, the YL-1000SL XXAB series can flow under pressure like silicone grease; After solidification, it has the same properties as a thermal conductive gasket and will not detach from the interface under the action of thermal cycling.
Advantages and features: Two component 1:1 use, good thermal conductivity, excellent electrical insulation and flame retardant performance, can be cured at room temperature or at high temperature.
Application scope: It is widely used in electronic assembly, industrial material reinforcement, and other applications, especially suitable for heat dissipation of heating electronic components. Power battery, power supply
Module assembly and reinforcement, LED lamp assembly, electronic component heat dissipation.
PLS CONTACT:
185084595 at QQ.com
Less ...
Results : https
More ...
