 More ...
Hydrogenated Hydrocarbon Resinis a low molecular weight thermoplastic aromatic resin obtained from petroleum- derived monomers. It is odor improved grade with low odor and low VOC, good compatibility with other resins and polymers. This grade is mainly used in adhesives, esp. EVA based Hot Melt Adhesives. Key Characteristics:·Good compatibility with EVA,SBSMutual solubility·Good thermal resistance·Low VOC and low odor·Water resistance, Insulation and excellent chemical stability. Typical Properties PropertyUnitTypical value Test methodColor (50% resin solid in Toluene)Ga #Max9#(ASTM D1544)Softening point (Ring & Ball)°C115-125(ASTM E28)Acid valuemgKOH/gMax 0.10(ASTM D974) Bromine valueg /100gMax.30(ASTM D1959)Ash content%Max.0.05(ASTM D 1063)Specific gravity20/20℃1.01-1.08(ASTM D71) ApplicationHot Melt Adhesive, Shoes Adhesive, PSA, Industrial Paints, Coating and Rubber application Packagingis available in 25kgs paper bag or 500kgs/1000kgs in bulk bag. STORAGE Inside storage is recommended and keep at temperature not exceeding 30oC. Pelletized forms of resins may block or lump in hot weather climates or if stored near heat sources. Resins are prone to gradual oxidation, some more so than others. This could result in darkening and/or it could have an adverse effect on the solubility of the resin in organic solvents or on its compatibility with polymers.  Less ... |
Results : degrease cleaner
