Product Description

Monocular outdoor thermal image telescope is an infrared camera that integrates surface temperaturemeasurement and real-time thermal image. The traditional inferred thermometer needs to measure every component one by one while it is not necessary for infrared imaging camera, thus saving time. The potential problems may be displayed on color display screen clearly. Moreover, the central point measurement cursor is used to locate quickly and accurately to measure the temperature of the target object.In order to increase the differentiation, the product is provided with a visible light camera. The thermal images and visible images are stored in the device and can be read through USB or stored in a computer to generate a report or for print.
Cleaning of the Products
Please use damp cloth or weak soap to clean the enclosure of the device. Don’t use abradant, isopropanol or solvent to clean.
The lens and screen should be cleaned with use of cleaning agents for professional optical glasses.
Lens Maintenance
Prevent damage of the infrared lens：
● Clean the infrared lens carefully. The lens is provided with refined anti-reflection coating.
● Don’t clean with force to prevent damage of the anti-reflection coating.The selectable color palette.
● Use a cleaning solution for lens maintenance, such as alcohol-based commercial lens cleaners, alcohol, and a lint-free cloth or paper towel. Compressed air tanks can be used to remove loose particles.

Clean the lens:
● The compressed air tank or dry nitrogen ion gun (if applicable) may be used to blow the loose particles on the lens surface.
● Dip the lint free cloth in alcohol.
● Squeeze the excessive alcohol in the cloth or apply the lint free cloth on dry cloth lightly.
● Wipe the lens surface by making circular motion. Then discard the cloth.
● If it is necessary to repeat above step, please use new cloth to dip with the cleaning solution to wipe.
Charging of the Battery and Description
Use USB data line to charge:
● This product has a built-in rechargeable battery.
● When the battery level is low, the top right of the screen will display.Please charge in time through TEPY-C USB interface.
● Pull off the USB line after fully charging.
Use recharge stand to charge:
1.Unscrew the battery cover and take out the batteries.
2.Used the charger from the original manufacturer to charge the batteries. Install the batteries properly according to the polarity as shown on the charger.
3.After it is fully charged, disconnect power supply for the charger, and remove the batteries.


Prompt: When this product lies idle for long, it shall be charged at least every three months to prevent irreversible loss of capacity due to too low battery power arising from its own discharge as it is kept too long.
Installing the Battery
(1) Turn the battery compartment knob counterclockwise to open the battery compartment cover;
(2) Install the battery in strict accordance with the positive and negative pole directions of the battery on the battery compartment cover;
(3) Close the battery compartment cover, and turn the battery compartment knob clockwise until it is locked up. Note: 1. Please do not use the battery whose insulating layer is damaged; 2. If the battery’s positive and negative poles are wrongly connected, the device will be unable to work, and that will damage the battery.
Performance Index
Product modelHT-C18
Infrared
Detector typeVanadium oxide uncooled infrared focal plane
Resolution ratio384x288
Pixel size12μm
Focus length25mm35mm54mm75mm
Field angle10.5°×7.9°7.5°×5.7°4.9°×3.7°3.5°×2.6°
Work band8~14μm
NETD≤ 40mk@25℃,@F/1.0
Frame rate≤50Hz
Focusing modeManual
Detection range
Character
1.7mx0.5mx0.3m2361m3306m5100m7083m
Vehicle
4.5mx2.0mx1.5m6250m8750m13500m18750m
Perception distance
Character
1.7mx0.5mx0.3m590m826m1275m1771m
Vehicle
4.5mx2.0mx1.5m1563m2188m3375m4688m
Display
Display screen typeOLED
Resolution ratio1440×1080
Display size0.39inches
Electronic zoom1×/2×/4×/8×
Diopter regulation±5SD

PaletteWhite hot, Black hot, Fire hot, Rainbow, Iron red, Cold color
Hot point trackSupported
Picture in pictureSupported
LanguageSimplified Chinese, Traditional Chinese, English, Russian and German
Storage
CapacityBuilt-in 16G EMMC(The system takes up some space and it is 13.8G actually)
PhotographingSupported
recordingSupported
Image/video formatJPG/MP4
Interface
USB interfaceCharging/export image and video
Power
Detachable recharge- able lithium battery1400mAh×2(battery model 18350)
General technical index
Overall power
consumption≤1.8W
Time of endurance≥5 hours
Work temperature-20℃ ~ +60℃
Storage temperature-30℃ ~ +70℃
Impact≤1000G
Protection gradeIP66
Size/weight
Product size198x57.5x64.3mm
Product weight580g

Product modelHT-C19
Infrared
Detector typeVanadium oxide uncooled infrared focal plane
Resolution ratio640×512
Pixel size12μm
Focus length25mm35mm54mm75mm
Field angle17.5°×14.0°12.5°×10.0°8.1°×6.5°5.9°×4.7°
Work band8~14μm
NETD≤ 40mk@25℃,@F/1.0
Frame rate≤50Hz
Focusing modeManual
Detection range
Character
1.7mx0.5mx0.3m2361m3306m5100m7083m
Vehicle
4.5mx2.0mx1.5m6250m8750m13500m18750m


Character
1.7mx0.5mx0.3m590m826m1275m1771m
Vehicle
4.5mx2.0mx1.5m1563m2188m3375m4688m
Display
Display screen typeOLED
Resolution ratio1440×1080
Display size0.39inches
Electronic zoom1×/2×/4×/8×
Diopter regulation±5SD

PaletteWhite hot, Black hot, Fire hot, Rainbow, Iron red, Cold color
Hot point trackSupported
Picture in pictureSupported
LanguageSimplified Chinese, Traditional Chinese, English, Russian and German
Storage
CapacityBuilt-in 16G EMMC(The system takes up some space and it is 13.8G actually)
PhotographingSupported
recordingSupported
Image/video formatJPG/MP4
Interface
USB interfaceCharging/export image and video
Power
Detachable recharge- able lithium battery1400mAh×2(battery model 18350)
General technical index
Overall power
consumption≤1.8W
Time of endurance≥5 hours
Work temperature-20℃ ~ +60℃
Storage temperature-30℃ ~ +70℃
Impact≤1000G
Protection gradeIP66
Size/weight
Product size198x57.5x64.3mm
Product weight580g

Introduction to Product Structure
①Photographing/
recording/up②Pseudocolor/picture in picture/right key
③Menu/Close UI/enter④Diopter adjustment
⑤Focal length adjustment⑥Power/return
⑦Type-C interface⑧Battery compartment
⑨Brightness/Hot point/
Track/Left key⑩Zoom In/Refresh/
Shutter/Down key

Key Description
Key/statePressHold down
Power
keyMain
interfaceIt can be configure as
screen off or freeze
frame of picture
through the menu.Pop out the
shutdown prompt
box to carry out
shutdown.
Menu
interfaceReturn____
Photo
keyMain
interfacePhotographingStart recording/ stop recording
Menu
interfaceUpward direction____
Brightness keyMain
interfaceBrightness adjustmentHot point tracking
Menu
interfaceLeftward direction____
Zoom in keyMain
interfaceZoom in(1x/2x/4x/8x)Refresh shutter
Menu
interfaceDownward direction____
Pseudocolor keyMain
interfacePseudocolor switchingOpen picture in
picture/close picture
in picture
Menu
interfaceRightward direction____
Menu
keyMain
interfaceEnter the menuOpen UI display/ close UI display
Menu
interfaceEnterReturn

Focal length adjustment: Adjust the focus to make the image clearer. Type-C interface: used for battery charging and connecting the computer to view device photos and video files.
Battery compartment: two detachable 18350 lithium batteries.
Diopter adjustment: Adjust your own vision.
Introduction to Icon of Main Interface


①Date/Time②Screen brightness
③Zoom in④Pseudocolor
⑤Record⑥SD card full
⑦USB connection⑧Battery level
⑨Pseudocolor name10Image brightness
11Image contrast12Scene mode
13Correction method14Automatic shutdown
15Hot point tracking



The icons will be displayed in the interface at the following conditions: recording icon: hold down the recording key to video. USB connection icon: when the data cable is connected to the computer;
SD card full icon: when the storage space is less than 100M.
Menu Description


False color: White hot, black hot, fire hot, rainbow, iron red, cold color.
Zoom : Electronic amplification 1X, 2X, 4X, 8X.
LCD brightness: The display brightness can be adjusted to 1~10 levels.
Image brightness: The brightness of the infrared image can be adjusted to 1~10 levels.

Image contrast: The contrast of infrared image can be adjusted to 1~10 levels.
Scene mode: The application scene can be set as standard, city or jungle.
Calibration method: The infrared image correction method can be set as manual calibration, automatic calibration and scene calibration.
Hotspot: The hot point tracking of infrared images can be set as on or off.
PIP: The picture in picture function is set as on or off in infrared
image mode.
IMU: Pitch angle and roll angle display, set on or off.
Language: Set the language of the device, including simplified
Chinese, traditional Chinese, English, Russian and German.
Photo: Photo list, view photos.
Video: Video list, view video.
Time/Date: Set the date (year, month, day) and time (hour, minute), time format (12 hours, 24 hours),and dateformat (year/month/day, day/month/year, month/day/year).
Bad point correction:Manual Bad point correction (left, right, up
and down navigation keys adjusts the cursor position. The menu key determines to remove bad points and press the power key to return).

Settings:Short press the power button, video interface, automatic shutdown time, recording duration, and picture-in-picture position.
● Short press the power button: can set the power. Press it for display off or freeze-frame of picture.
● Video interface: set whether to bring UI display information when recording;
● Automatic shutdown time: may set no shutdown, 5 minutes, 10 minutes, 20 minutes, 30 minutes.
● Recording duration: set the duration of each video file, including 5 minutes, 10 minutes, 20 minutes and 30 minutes;
● Position of picture in picture: Set the position of picture in picture in the center, which can be set as upper right, lower right, lower left and upper left.
Device info: View the model of the device, detector pixel, detector type, screen size, screen pixel, battery capacity, hardware version, firmware version, application version, storage space, etc, and also carry out application update, parameter resetting and formation, etc of the device.
Photos and Videos
View photos: In the photos of the menu, open the photo list and press the menu key to view photos. When viewing a photo, press the brightness key to view the previous photo, and press the pseudocolor key to view the next photo.
Photo deletion: In the photo list, press the brightness key to pop up a prompt for deleting photos, and press the menu key to confirm deletion.
View video: In the menu video, open the video list and press the menu key to view the video.
Delete video: In the video list, press the brightness key to pop up a video deletion prompt, and press the menu key to confirm the deletion.
Introduction to Palette
The color palette can be used to change the pseudocolor display of infrared images on the display screen. Some palettes are more suitable for specific applications and can be set as needed.
The palette is divided into six colors: white hot, black hot, fire hot, rainbow, iron red and cold color.
These palettes work best under condition with high thermal contrast, allowing for additional color contrast between high and low temperatures.
Choose the right color palette to display the details of the target object. For palette colors of rainbow, iron red and cold colors, the coloration outweighs the display colors, which are very suitable for high thermal contrast, and are used to improve the color contrast between high temperature and low temperature. However, white
heat and black heat provide uniform linear color.
The following pictures are taken from the same object, but with different palettes selected:



Less ...