|
 Description
|
The IC card reader can
set five output format steps:
1. Use
IC card to set output format, such as IC ...  More ...
The IC card reader can
set five output format steps:
1. Use
IC card to set output format, such as IC card number (called A card): B5 BB 23
FE (opposite to the UID read by NFC mobile phone software, we call it reverse
order, and vice versa.)
2. The
IC card is not detected within 1 second after power-on, and the setting fails.
The card reader output is the card number in the current format.
3. If
the IC card is detected within 1 second of power-on, it will enter the setting state
(it is better to put the A card in the card reading range of the card reader
for power-on). At this time, the LED light will flash continuously (about 5
seconds). Please start setting within this period.
1)
Swipe another IC card (called card B) once, and then swipe card A again or wait
for 5 seconds. The card reader is successfully set, and the output IC card
number is the 10-digit decimal reverse sequence: 3048940542 (8H10D, take 4
bytes to 10 digits)
2)
Brush the B card twice in succession, and set the output card number to 8-digit
decimal reverse order: 12264446 (6H8D, the last 3 bytes are converted to 8
bits)
3)
Brush the B card three consecutive times, and set the output card number to
8-digit decimal reverse order: 18709214 (2H3D4H5D, the second byte turns to 3
bits, and the second byte turns to 5 bits)
4)
Brush B card 4 times continuously, and set the output card number to hexadecimal
reverse order (8H or 14H): B5 BB 23 FE
5)
Brush B card 5 times continuously, and set the output card number to
hexadecimal positive sequence (8H or 14H): FE 23 BB B5
4. In
the configuration mode, swipe the third IC card (called C card), and the card
reader is set to not carry the carriage return.
5. In
the configuration mode, swipe the A card again to confirm to exit the
configuration.
Features：
l The faraway
distance
l Various voltage optional
l Read CSN card number only
l With burgers
and LED lights
Different
output formats
Application:
l Tablet PC
l Lift control
l POS terminal
l Parking system
l Access control
l Handheld terminal
l Attendance application
l Recreational Machine
l Barrier gate/rapid-open gate
Module
NO.:
Module
NO.
Interface
OM-HM211-WG
Wiegand26/34，5V
OM-HM211-T
TTL，5V
OM-HM211-S
RS232，5V
OM-HM211-H
USB-HID，5V
OM-HM211H-WG
Wiegand26/34，9-12V
OM-HM211H-S
RS232，9-12V
Parameter:
Frequency
13.56MHz
Standard
ISO14443A
Supporting Cards
Mifare s50/70，F08，ultralight，ntag Card
Interface
Wiegand26/34, TTL，RS232，USB-HID
Power Supply
5V，9-12V
Card
Reading Distance
0~6cm（Depending on
label size ）
Current
<30mA
Operating Temperature
0℃~ 55℃
Antenna
built in
Dimension
45 *25*6mm
 Less ...
|
Others
Delivery Lead Time |
Supply Ability |
25 days for OEM, 3-5 days for ready goods |
1 Piece |
50000pcs per Month |
|
|
|
Results : interface code reader
