The IC card reader can set five output format steps: 1. Use IC card to set output format, such as IC ...    More ...

The IC card reader can set five output format steps:
1. Use IC card to set output format, such as IC card number (called A card): B5 BB 23 FE (opposite to the UID read by NFC mobile phone software, we call it reverse order, and vice versa.)
2. The IC card is not detected within 1 second after power-on, and the setting fails. The card reader output is the card number in the current format.
3. If the IC card is detected within 1 second of power-on, it will enter the setting state (it is better to put the A card in the card reading range of the card reader for power-on). At this time, the LED light will flash continuously (about 5 seconds). Please start setting within this period.
1) Swipe another IC card (called card B) once, and then swipe card A again or wait for 5 seconds. The card reader is successfully set, and the output IC card number is the 10-digit decimal reverse sequence: 3048940542 (8H10D, take 4 bytes to 10 digits)
2) Brush the B card twice in succession, and set the output card number to 8-digit decimal reverse order: 12264446 (6H8D, the last 3 bytes are converted to 8 bits)
3) Brush the B card three consecutive times, and set the output card number to 8-digit decimal reverse order: 18709214 (2H3D4H5D, the second byte turns to 3 bits, and the second byte turns to 5 bits)
4) Brush B card 4 times continuously, and set the output card number to hexadecimal reverse order (8H or 14H): B5 BB 23 FE
5) Brush B card 5 times continuously, and set the output card number to hexadecimal positive sequence (8H or 14H): FE 23 BB B5
4. In the configuration mode, swipe the third IC card (called C card), and the card reader is set to not carry the carriage return.
5. In the configuration mode, swipe the A card again to confirm to exit the configuration
    


Features:
     The faraway distance
l           Various voltage optional
l           Read CSN card number only
l           With burgers and LED light
Di         Different output formats
 
 
 Application:
 
l                Tablet PC
l                Lift control
l                POS terminal
l                Parking system
l               Access control
l               Handheld terminal
l               Attendance application
l               Recreational Machine
l               Barrier gate/rapid-open gate
 
 
Module NO.:
                                             Module NO. 
                                           Interface
                     
                                      OM-HM211-WG
                                          Wiegand26/34，5V
                     
                                      OM-HM211-T
                                          TTL，5V
                     
                                      OM-HM211-S
                                          RS232，5V
                     
                                      OM-HM211-H
                                          USB-HID，5V
                     
                                      OM-HM211H-WG
                                          Wiegand26/34，9-12V
                     
                                      OM-HM211H-S
                                          RS232，9-12V
                     
    






















    Parameter:   
                                           Frequency
                                          13.56MHz
                     
                                      Standard
                                          ISO14443A
                     
                                      Supporting   Cards
                                          Mifare s50/70，F08，ultralight，ntag Card
                     
                                      Interface
                                          Wiegand26/34, TTL，RS232，USB-HID
                     
                                      Power   Supply
                                          5V，9-12V
                     
                                      Card  Reading   Distance
                                          0~6cm（Depending on   label size ）
                     
                                      Current
                                          <30mA
                     
                                      Operating   Temperature
                                          0℃~   55℃
                     
                                      Antenna
                                          built   in
                     
                                      Dimension
                                          45 *25*6mm
                     
    




































Less ...