Model NumberLT-JJ10-ALoad capacity200kg, 500kg (force value can be set)Load Accuracy3/10000 Test ...    More ...

Model NumberLT-JJ10-A
Load capacity200kg, 500kg (force value can be set)
Load Accuracy3/10000  
Test accuracystatic: ± 2%; dynamic force: ± 3%     
Displacement and travel0-300mm or 0-500mm are optional.
Time of various actions 0.01-30s can be set arbitrarily. 
Technical parameters
1. Load capacity: 200kg, 500kg (force value can be set)
2. Accuracy of load element: 3/10000 
3. Test accuracy: static: ± 2%; dynamic force: ± 3%     
4.Electric cylinder and cylinder loading: each cylinder has a separate proportional valve control   System. Cylinder requirements for imported brands, electrical proportional valve requirements for imports    Brand.
5. Displacement and travel: 0-300mm or 0-500mm are optional.
6. Time of various actions: 0.01-30s can be set arbitrarily.
7. Test speed: 1-30 times/min can be set at will.
8. Test times: 0-999999 can be set at will.
9.Power off memory: with stop/power off memory and stop function.   Test results will be saved automatically when the machine is shut down or out of power.
10. Stop mode: stop the machine after reaching the test number and alarm.
11. Sensors: sensors of well-known brands.
12. The equipment has a fault self-diagnosis system to facilitate the inspection and troubleshooting.
13.The basic frame adopts the modular construction of high-strength aluminum metal frame,    The bottom frame is of solid structure.
14.Base: high strength industrial aluminum profile + gb 45 steel, thickness ≥10mm,    A strong magnet holds the specimen in place.
15.Program screen can choose simplified Chinese, traditional Chinese, English, in Program Settings page can be changed at will.
16. Computer + force sensor + encoder form force and displacement closed-loop control. Computer integrated control system, data acquisition multi-channel, control multiple channels, can control multiple test shaft at the same time, can set a cylinder or motor action alone, including single or multiple reciprocating test, can set two groups of cooperative action, reciprocating test. Each channel shall be operated through the reference synchronization time to ensure the synchronization of action and data processing. Different channel groups shall be controlled. If the sample of one channel is damaged, the related channels in the same group will stop at the same time, and the remaining channels can continue to work. It requires simple interface, complete functions, high speed response and easy operation. Accurate movement, low failure rate.
17. The control of force and displacement velocity can be realized, and the maximum and minimum life curves of displacements - time, force-time, force-displacement and force-displacement can be displayed (the change curves of maximum force and maximum displacement values of each channel in each cycle). There is no need to manually adjust the force value and displacement, the displacement offset of each time is displayed to realize intelligent integrated control.
18. KGF,kN,N, tf and LBF are available for force units.
19. The units of displacement can be selected as mm and in.
 20. Each force and displacement sensor can be calibrated in 10 segments or in a single segment.
21. The report can be output into Word, Excel and PDF documents, which can be saved and transmitted    The data can be connected to the printer to print the test results.
22.The instrument shall adopt the electric ascending and descending device, left and right, front and rear free    Moving, easy to sample.
23.Each cylinder can be set up to run the steps, the steps include open loop    And closed-loop selection. Up to 150 run steps can be set up.
24.Record the curve of each cycle of each cylinder and check it when the test stops    Look at the curve for any cycle.
25.The test curve data is recorded in the database when the program does not run the test    When trying, you can call the display curve data from the database.
26.Computer software automatically servo control, the display screen to observe all the force values and offset data.
27.Parts requirements: ball screw, linear guide, bearings, relays,    Cylinder, programming control module, electrical proportional valve above the components must be     Imported parts.  
28. The machine can be tested with eight cylinders simultaneously/according to the test item or specified
29. Force and displacement can be set to display small Numbers 0 ~ 4. 
30. The impact and drop in the test item of this integrated machine can be realized by a single machine. Do not put it in the integrated machine.
 
Standards
GB/ T10357.1-2013 mechanical properties of furniture  part 1: table strength and durabilityMechanical properties of furniture
GB/ T10357.2-2013 mechanical properties of furniture  part 2: stability of chairs and benchesTesting of mechanical properties of furniture
GB/ T10357.3-2013 mechanical properties of furniture  part 3: strength and durability of chairs and stoolsTesting of mechanical properties of furniture
GB/ T10357.4-2013 mechanical properties of furniture  part 4: cabinet stability Testing of mechanical properties of furniture
GB/ T10357.5-2013 mechanical properties of furniture  part 5: cabinet strength and durabilityTesting of mechanical properties of furniture
GB/ T10357.6-2013 mechanical properties of furniture part 6: strength and durability of single-storey bedsTesting of mechanical properties of furniture
GB/ T10357.7-2013 mechanical properties of furniture  part 7: table stability
 
Product Usage
This machine is a comprehensive testing machine, which is using for testing the mechanical properties of furniture. It is suitable for all kinds of furniture factory finished products which is used in families, hotels, and restaurants, such as tables, chairs and stools, cabinets, single-layer beds. Other table class, chair and stool class, cabinet class, single-layer bed class furniture can be referred to the implementation. The strength and durability test of tables, chairs and stools, cabinet class, single-layer bed is to test the strength and endurance of the furniture under the conditions when its each part receives one-time or repeatable load by simulating the furniture in normal use or misuse. The size of the machine's basic frame will be not less than: 8500mm*3200mm*2200mm (highest point 2600mm) (length *width * height). The basic frame adopts the high strength aluminum metal frame modular structure. And the bottom frame uses the three-dimensional structure. The whole structure is extremely stable. Base: high strength industrial aluminum Profile + gb 45 steel, thickness ≥10mm. The strong magnet is used to fixed sample and to make sure the instrument runs stably and does not vacillate. 
 
 
Products features
1.The horizontal/vertical movement of the mechanical furniture integrated testing machine beam is pneumatic or electric, and the force adjustment is performed by the Japanese SMC servo proportional valve (including   Other mechanical test equipment)
2.According to the requirements of the test project, sufficient tooling, fixture, loading pad, loading module, weight, sandbag, block, etc., fixture can realize quick disassembly   Equipped with certain versatility.
3. Beautiful and elegant appearance: fully hidden wiring, to prevent leakage in the operation process and any power system risk.
4. Force sensor and digital force value display system, respectively, display the real-time force status of each channel, and have the maximum force value recording function.
5. The machine can display each test data by real-time waveform and value respectively.
6. Each kind of test is not related, different tests are independent of each other, adding new tests or reducing a test does not affect the original test.
7.Unattended test can be realized, with automatic stop function, workpiece damage (position sensing) automatically stop the test and automatically retain the test junction   Fruit. Automatic intelligent alarm for abnormal conditions and test completion.
8. With solenoid valve, dual pressure regulating oil and water filtering, position sensor and other self-dynamic test pieces, whether or not damaged, and automatically stop the test. 
9. The report is divided into single cylinder test and combined test, which can show the curve graph and the maximum and minimum force and maximum and minimum displacement of each time.
10. Use three indicator lights to realize the notification function of test completion, alarm, during the test.
11. The program screen shows the test status of each cylinder and the test status of each combination with the lamp number.
12.Each cylinder has the induction of forward limit and backward limit, to provide the judgment of open loop test, when using limit judgment, pay attention to the speed is too fast overshoot, or questions that cannot be judged.  

Less ...