Our 5005 aluminum sheet/coil of is certificated to ASTM, EN as well as JIS, etc. and it can be cut to size at customers' need. Mg is the principal element in the 5005 aluminum sheet/coil and when it used as main alloying element or combined with Mn, high strength and no-heat treatable properties can be realized. 5005 aluminum sheet/coil of Mingtai Al. has many tempers available, such as 5005-H12, 5005-H14, 5005-H16, 5005-H18, 5005-H22, 5005-H24, 5005-H32, 5005-H34, 5005-H36, 5005-H38, etc. For more info please visit https: //www. winowalu. com/aluminium-sheet-plate
Elements
Si
Fe
Cu
Mn
Mg
Cr
Zn
Ti
Others
Al
Content
0.3
0.7
0.2
0.2
0.5-1.1
0.1
0.25
-
0.15
Remain
Alloy
Temper
Specified
thickness
Tensile
strength
Yield
strength
Elongation
(MPa)
(MPa)
(%)
5005-H34
or
5005-H24
0.2~0.63mm
138.179
Min104
min 3
0.63~1.2mm
min 4
1.2~6.3mm
min 5
6.3~50mm
min 8
5005-H32 or 5005-H22
0.2~600mm
118-158
Min83
min 3
5005-H14
145-186
min118
min1
Features and Applications of 5005 Aluminum Sheet/Coil
The main content of 5005 aluminum sheet/coil is Fe, Mg and Si, thus, it has good weld-ability and resistance to correction (especially when anodized), which resulting in suitable for marine applications. 5005 aluminum sheet/coil is also a non-heat treatable alloy and it can be strengthened (hardened) by cold working. However, hot working should not normally be necessary. Besides, it scores well in formability, especially in softer tempers. The machinability of 5005 aluminum sheet/coil is generally fairly poor. 5005-H34 and 5003-H38 can be machined, but with much more difficult than many other aluminum alloys.
Our advantages:
Technologies: Top polishing technology guarantees good luster and smooth surface.
Markets: Obtain market sharing all over the world.
Equipment: Advanced cutting lines to provide a wide range of specifications.
Production capacity: 300, 000 tons annually in total.
Employees:Over 30 sale persons sales team to provide thoughtful service for customers.
Responsibility: Engaged in charity donation and provide eco-friendly products.
Packaging and delivery
Our standard packaging specs meet the export standard. Plastic film and brown paper can be covered at customers' need. What's more, wooden case or wooden pallet is adopted to protect products from damage during the delivery. There are two kinds of packaging, which is eye to wall or eye to sky. Customers could choose either of them for their convenience. Generally speaking, there are 2 tons in one package, and loading 18-22 tons in one 20' container, and 20-24 tons in one 40' container.
Contact ways:
Cell +86-18037681896
Your inquiry will be replied in 12 hours.
Less ...