1)Main Technical Parameters
Technical parameters
molding
2pcs/mould
frequency
2400r/m
productivity
1300-2000pcs/day
hydraulic method
mould virbration
demold method
motor-driven
turning method
motor-driven
total power
5KW
total mass
1050kg
Molding cycle
45S
turning method
crushed stone, sand, cement, dust and coal fly ash, cinder, slag, gangue, gravel, perlite, and other industrial wastes.
total power
concrete blocks, solid/hollow/cellular masonry products, paving stones with or without face mix, garden and landscaping products, slabs, edgers, kerbstones, grass blocks, slope blocks, interlocking blocks, etc.
total mass
widely used in buildings, road pavers, squares, gardens, landscaping, city constructions, etc.
2)Productivity:
Item
Sample
Size
Quantity
Cycle molding
Hollow block
400×200×200 mm
2pcs/mould
40~45s
400×150×200 mm
3pcs/mould
40~45s
400×120×200mm
3pcs/mould
40~45s
3)Good reason to choose the machine
QT40-3C Movable Type Block Machine is easy in operating and durable in use. Only with 100-300Sq. meters of concrete floor, it can be installed to use. Also, for this machine, it no needs to use carriage plates. For less investment and quicker results, it is an ideal choice for small sized block factory. Only with1-2 workers, it is enough for operating this machine
4)Other Information
Working Shed
Other
Working Site:
300sq.m
Staff and Workers:
1-2
Working Shed:
300sq.m
Power Distribution:
18kw
Raw Material Work Shop:
300sq.m
Water Consumption:
3T/day
Office:
30sq.m
Commercial Power:
380V/50Hz
5)Raw materials of the brick:
a)Wide range of raw materials could be adopted such as fly ash, coal residue, coal wastes, chemical residue, sand, stone, concent, cement, construction wastes and so on. therefore, it is a new tpye of machine which has the characteristics of energy conservation and environmental protection.
b)8-10% cement, 30-40% sand, 50-60% crushed stone ( you can add some other material by local situation).
6)products of the machine
7)company Information
Linyi Yingcheng International Trade Co.LTD,was established on Fouda Intelligent Manufacturing Co,LTD.It is located in Linyi city,near Qingdao port.The company is a national large scale designated wall material machinery manufacturer,a coalition of researching,producing and marketin,and services
8)Our services:
Pre-sale service support
According to each customer's demand and budget, we offer you the professional solution, process flow design and production equipment. More importantly, we welcome every customer to visit our factory and working machine in the site before placing the order. We will arrange cars, hotels and translators for the visiting customers.
During-sale service support
Assist clients to finish the factory planning. Before delivery equipment to customer s, complete debugging and checking. Provide a full instruction manual for the whole system. Provide technical guidance for the installation and use of the unit, including installation advice and electrical connection. Provide unit debugging and training for the operation of the machine on the working site and coordiante the customers with check and acceptance of the unit
After-sale service support
Send technicians to installation site for the guidance, equipment adjustment and training. Provide high-quality spare parts thoughout the year, and the maintenance technicians are always ready to provide technical help.
Any problems,pls contact me freely at any time
Linda
Mobile:+8618369506181
Web:www.fudabrickmachine.com
Less ...
Results : https
More ...
