Sleeve Label Shrink Tunnel Machine
- Brief Introduction
Steam shrink tunnel is used for shrinking sleeve labels to label kinds of bottles: different and irregular round bottles, square bottles, flat bottles and women-shaped bottles. By shrinking shrinkable film sleeve to seal bottles caps /necks, wrap bottles body even cover bottle bottom.
To get smooth shrink effect, we usually adjust the heights and positions of the 3 sections of steam spray tubes insides of tunnel. Bottles run on the conveyor, the shrink usually goes from down to top of bottles.
- Features of our steam shrink tunnel.
The blower motor’s holder is made of SS304 stainless steel.
The elbow which connects blower motor is made of SS304 stainless steel.
The whole of frame and doors are made SS304 stainless steel.
The steam spray tubes are made of SS304 stainless steel.
The steam transmission tubes are made of SS304 stainless steel.
The leafage inside of blower is also made of SS304 stainless steel.
Item Models
HF-1200M
HF-1500M
HF-2000M
HF-2300M
Length of tunnel
1.2meters
1.5meters
2.0meters
2.3meters
Blower powder
Ø12, 0.25KW
Ø12, 0.25KW
Ø12, 0.25KW
Ø12, 0.25KW
Powder supply of blower
220V 3P 60Hz or 220V 1P 50Hz
Entrance /exit height
Max 350mm
Entrance /exit width
130~210mm (fixed size once confirmed)
Running pressure
Max 0.6Mpa
Max 0.6Mpa
Max 0.6Mpa
Max 0.6Mpa
Weight
180kg
200Kg
220kg
230kg
Steam consumption
18kg/h
21kg/h
24kg/h
24kg/h
Conveyor speed
0~35m/minute
0~35m/minute
0~35m/minute
0~35m/minute
Outline size (m)
L1.2*W0.4*H1.5
L1.5*W0.4*H1.5
L2.0*W0.4*H1.5
L2.3*W0.4*H1.5
Less ...